Product ID:ALUMINUM ALLOYS 1-7
MSDS Date:01/01/1987
FSC:3680
NIIN:00F005917
MSDS Number: BBTMW

GATE CITY STEEL/OMAHA, NE 68132

Emergency Phone: (402) 399-9905

Cage: 76933

GATE CITY STEEL/OMAHA, NE 68132

Cage: 76933

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 99.7%

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: <10%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

MAGNESIUM

CAS: 7439-95-4

RTECS: OM2100000

Fraction By Weight: <10%

ZINC (SARA III)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: <10%

OSHA PEL 10 MG ZNO/M3

ACGIH TLV: 10 MG ZNO/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: <.5%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Effects of Overexposure:MUCOUS MEMBRANCE & RESP IRRIT/METAL FUME
FEVER/ABDMINAL CRAMPS/CNS DAMAGE/HEADACHE/NAUSEA/ANEMIA.

First Aid:INHALATION: REMOVE TO FRESH AIR, SEEK MEDICAL AID
IMMEDIATELY. EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES.

Flash Point:NONE
Extinguishing Media:DRY POWDER (CLASS D) OR SAND
Fire Fighting Procedures:DON'T USE WATER OR HALOGEN ON DUST FIRES.
Unusual Fire/Explosion Hazard:NONFLAMMABLE. DAMP ALUMINUM DUST MAY
SPONTANEOUSLY HEAT/LIBERATE HYDROGEN TO FORM EXPLOSIVE MIXTURES

Spill Release Procedures:NO SPECIAL PROCEDURE

Handling and Storage Precautions:DON'T TOUCH CAST ALUMINIUM METAL OR
HEATED ALUMINUM PRODUCT W/O KNOWING METAL TEMPERATURES. ALINUM
EXPERIENCES NO COLOR DURING HEATING.
Other Precautions:OPERATIONS SUCH AS BURNING, WELDING, SAWING, BRAZING
& GRINDING MAY RELEASE FUMES OR DUSTS WHICH MAY REPRESENT HEALTH
HAZARDIF TLV'S ARE EXCEEDED.

Respiratory Protection:RESP SHOULD BE USED TO AVOID INHALATION OF
PARTICULATES WHEN >TLV.
Ventilation:LOCAL SHOULD BE UTILIZED WHEN WELDING/BURNING/SAWING.
Protective Gloves:WELDING
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:SHOULD BE UTILIZED AS REQUIRED BY THE
WELDING STANDARDS.
Supplemental Safety and Health
MSDS UNDATED. ALSO CONTAINS: CO (GF8750000) <2%, FE (NO7400000) <2%, MN
(OO9275000) <2%, SI (VW0400000) <2%, NI (QR5950000<.5%, LEADED
ALLOYS 2011/6262-LEAD (PB) (OF7525000) <1%.

Boiling Pt:B.P. Text:NONE
Spec Gravity:>2
Solubility in Water:NONE
Appearance and Odor:SILVER-METALLIC, ODORLESS SOLID

Stability Indicator/Materials to Avoid:YES
ANHYDROUS BROMINE/STRONG OXIDIZERS/AMMONIUM NITRATE/IODATES.
Stability Condition to Avoid:CONTACT W/HALOGEN ACIDS & SODIUM HYDROXIDE
_
Hazardous Decomposition Products:CO/CO2/OZONE/NOX/INFRA-RED &
ULTRA-VIOLET RADIATION.
Conditions to Avoid Polymerization:_
_

Waste Disposal Methods:FOR DISPOSAL OF THIS MATERIAL AS A WASTE, ACT IN
ACCORDANCE WITH ALL APPLICABLE FEDERAL, STATE, AND LOCAL WASTE
MANAGEMENT REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.